English and Chinese Version

English   Chinese

You are here:Home»Battery Powered Tools»EZ-6B free dies Battery Powered cable Crimper

EZ-6B free dies Battery Powered cable Crimper

Rate this item
(2 votes)

EZ-6B free dies Battery Powered cable Crimper, no dies required, Pleaser refer the manual of this tool  EZ-6B free dies Battery Powered cable Crimper

EZ-6B Battery Powered Crimping tool for AL/CU cable lugs up to 240mm2 with Li-ion battery.

 

1. No dies required, wide crimping

2. the connecting material centering automatically when crimping

3. All tools can be controlled by one key-press the trigger to start working, half loosing the trigger 
means stop forcing pressure, loosing fully means piston return to the original position.

 

4. LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by 
the Display, also we can special making for customer to show the pressure if necessary.

 

5. Air Cooling Heat dissipation system to extend using.

6. Heads Rotates 350 degree in order to gain better access to tight corners or other difficult working areas.

 

7. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of 
non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 
50% more capacity and shorter charging cycles copare to NiMH batteries. 

8. The unit is equipped with a double piston pump which is characterised by a rapid approach of the 
dies forwards the connector and a slow crimping motion.

 

  • Technical Parameters:
    Crimping range Up to 240mm2
    Crimping force 60KN
    Stroke 35mm
    Crimp/charge 250times(Cu 150mm2)
    Crimping cycle 3-6s(depend on the size of cable)
    Voltage 18v
    Capacity 3.0Ah
    Charging time 2hours
    Package Plastic box
    Accessories
    Battery 2pcs
    Charger 1pcs
    Sealing ring of cylinder 1set
    Sealing ring of safety valve 1set

 EZ-6B free dies Battery Powered cable Crimper

Parts No.

Description

Function

1

Die

For crimping, non-interchangeable die 

2

Head

For locking /standing the crimping die

3

Trigger

For starting operation

4

Retract button

For manual retracting the piston in case of an incorrect operation.

5

LED indicator

For indicating the operating condition and battery discharging situation.

6

Battery lock

For locking/unlocking the battery.

7

Battery

For supplying power, rechargeable Li-ion18V.

Read 313 times Last modified on Wednesday, 18 June 2014 00:40

Service

About Us

Relationship

Follow Us On

facebookFacebook

 twitterTwitter

 linkedinLinkedin

youtubeYoutube