EZ-400U Battery Crimping Tool for AL/ CU cable lugs 16-400mm2 with Li-ion battery.
1. The unit is equipped with a double piston pump which is characterized by a rapid approach of
the dies forwards the connector and a slow crimping motion.
2. The hydraulic unit incorporates an automatic retraction which returns the piston into its starting
position when the maximum operation pressure is reached.
3. A manual retraction allows the user to return the piston into the starting position in case of an
incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the
piston& die when the button is pressed.
4. The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to
gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of
non operation the tool is always ready to operate. In addition we see a lower power weight ratio with
50% more capacity and shorter charging cycles compare to NiMH batteries.
6. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal
sounds and a red display flashes.
For interchangeable dies, series 13, wide crimping
- Closed H-crimping head, rotatable
- Electronic control and monitoring of crimping operation
- Integrated pressure measurement with visual and audible signals in case of failure
- Evaluation function using optical interface and USB adapter
- One-button operating concept for controlling all tooling functions
- Ergonomic 2-component plastic housing with soft linings for comfortable and safe one-hand operation
- Balanced centre of gravity for easy handling and effortless operations
- LED for workplace illumination
- High-performance 18V Lithium-ion battery with high capacity and extremely short charging time
- High-performance motors for maximum operating speed
- 2-stage hydraulic system with fast feed and power stroke
- Energy saving function by stopping motor after successful crimping process
- Crimping force: 120KN
- Stroke: 42mm
- Crimping range:Cu16-400mm
- Standard dies: 16,25,35,50,70,95,120,150,185,240,300 ,400MM2
- Crimping per charge: 120crimps ( Cu mm)
- Crimping cycle: 6s-18s(depend on the size)
- Battery voltage: 18v
- Battery capacity: Ni-MH/ 3.0Ah
- Charging time: 2 hours
- Package: Metal box
- Crimping dies: 16,25,35,50,70,95,120,150,185,240,300,400MM2
- Battery 2 pcs
- Charger 1pc
- Sealing ring of oil cylinder: 1 set
- Sealing real of safety valve: 1 sets